Ip Prefix-List - Zte ZXR10 Command Manual

Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
deny
<extcommunity-num
ber>
Once a group value is allowed, it implies that this extended com-
munity group list deny any other things.
This example describes how to create an extended community
group list and control the access to it.
ZXR10(config)#ip extcommunity-list 1 permit rt 1:1
ZXR10(config)#ip extcommunity-list 1 deny rt 1.1.1.1:10
ZXR10(config)#ip extcommunity-list 1 permit soo 1:1
ZXR10(config)#ip extcommunity-list 1 deny soo 1.1.1.1:10
set extcommunity
show ip extcommunity-list

ip prefix-list

Use this command to create a prefix list for BGP and control the
access to it. Delete the prefix list with the no form of this com-
mand.
Global configuration
ip prefix-list <prefix-list name>[seq <seq>]{permit | deny |
description}{<prefix><Length>|<description text>}[ge <valu
e>][le <value>]
no ip prefix-list <prefix-list name>[seq <seq>]{permit | deny
| description}{<prefix><Length>|<description text>}[ge <val
ue>][le <value>]
<prefix-list-number>
permit
deny
seq
<seq>
description
<description text>
<prefix>
<Length>
ge
Confidential and Proprietary Information of ZTE CORPORATION
Denies accessing the match conditions
Community number configured by the
set community command, valid values
are: <1~65535>:<0~4294967295> or
A.B.C.D:<0~65535>
Identifies one prefix list, 1~ 6 characters
Allows accessing the match conditions
Denies accessing the match conditions
Designates the position in prefix-list
Identifies the position in the prefix list, range:
0~4294967294
Designates prefix-list description
Prefix-list description
Matched 32–bit prefix address
Matched prefix mask, range: 0~32
Designates mask range, larger or equal to
one specific value
Chapter 6 BGP4+ Protocol
97