Neighbor Send-Community; Neighbor Send-Label - Zte ZXR10 Command Manual

ZXR10 Command Manual (IPv6 Volume)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Purpose
Command Modes
Syntax
Syntax
Description
110 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10(config-router)#address-family ipv6
ZXR10(config-router)#neighbor 2000::1 router-reflector-client
bgp client-to-client reflection
bgp cluster-id

neighbor send-community

Use this command to send the community attribute when routes
are advertised to neighbors or neighbor peers. Restore default
with the no form of this command.
Router configuration and address family configuration
neighbor [<ipv4-address>|<ipv6-address>|<peer-group-nam
e>] send-community
no neighbor [<ipv4-address>|<ipv6-address>|<peer-group-na
me>] send-community
<ipv4-address>
<ipv6-address>
<peer-group-name>
This command is disabled by default.
This example describes how to send the community attribute when
routes are advertised to the BGP neighbor 2000::1.
ZXR10(config)#router bgp 1
ZXR10(config-router)#address-family ipv6
ZXR10(config-router)#neighbor 2000::1 send-community

neighbor send-label

Use this command to configure the 6PE ability of neighbors or
neighbor peer groups. Disable this function with the no form of
this command.
IPv6 address family configuration
neighbor [<ipv4-address>|<ipv6-address>|<peer-group-nam
e>] send-label
no neighbor [<ipv4-address>|<ipv6-address>|<peer-group-na
me>] send-label
<ipv4-address>
<ipv6-address>
<peer-group-name>
Neighbor IPv4 address
Neighbor IPv6 address
Peer group name
Neighbor IPv4 address
Neighbor IPv6 address
Peer group name