Show Ipv6 Pim Rp Mapping - Zte ZXR10 Command Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Related
Commands
Filed
Pref
Nexthop address
Nexthop name
show ipv6 pim mroute

show ipv6 pim rp mapping

Use this command to display the RP group information.
All modes
show ipv6 pim rp mapping [info-source <info-source>]
<info-source>
The description of command information is shown below.
Field
Group
Rp
Protocol
RPF
Info source
Expires
ipv6 router pimsm bsr-candidate
ipv6 router pimsm rp-candidate
ipv6 router pimsm static-rp
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 IPv6 Multicast Protocol
Description
Priority level
Next hop address
Next hop interface name
Specifies where CRP can be learnt : bsr
means it learns from BSM announcement
information. Embedded means it learns from
embedded RP. Reserved means it learns from
the reserved RP. Static means it learns from
the static configuration
Description
Multicast group address and mask
Candidate RP address
Protocol type
Rpf neighbor address
RP information source: static from means it
is learnt from static configuration. bsr from
means it is learn from BSM announcement
information
Expire time of the candidate RP
153