Ipv6 Mld Snooping Query-Interval; Ipv6 Mld Snooping Query-Response-Interval - Zte ZXR10 Command Manual

ZXR10 Command Manual (IPv6 Volume)
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Related
Commands
Purpose
Command Modes
Syntax
136 Confidential and Proprietary Information of ZTE CORPORATION
This command does not take effect until Layer 3 multicast routes
are configured.
� This example describes how to enable main switch of the
querier.
ZXR10(config)#ipv6 mld snooping querier
� This example describes how to enable main switch of the
querier and set VLAN10–20 to the querier.
ZXR10(config)#ipv6 mld snooping querier vlan 20-30

ipv6 mld snooping query-interval

ipv6 mld snooping query-response-interval

ipv6 mld snooping
query-interval
Use this command to configure the query-interval of the proxy
querier. Restore the default value with the no form of this com-
mand.
Global configuration
ipv6 mld snooping query-interval <interval>
no ipv6 mld snooping query-interval
<interval>
This command does not take effect until the proxy querier is con-
figured.
ipv6 mld snooping querier

ipv6 mld snooping query-response-interval

ipv6 mld snooping
query-response-interval
Use this command to set the maximum query-response-interval
of the proxy querier. Restore the default value with the no form
of this command.
Global configuration
ipv6 mld snooping query-response-interval <interval>
no ipv6 mld snooping query-response-interval
Query-interval (the period of sending
the query packets), in seconds, range:
30~65535, default: 125 seconds