Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
Purpose
Command Modes
Syntax
Instructions
Purpose
Command Modes
Syntax
Syntax
Description
ipv6 mtu
show ipv6 nat statistics
Use this command to display Network Address Translation-Protocol
Translation statistics.
Privileged EXEC
show ipv6 nat statistics
This command is supported after the platform version 4.6.02.
Some Network Address Translation-Protocol Translation statistics
are displayed, such as the number of translation entries, number
of dropped packets, and number of timed out translation entries.
This example describes how to display Network Address Transla-
tion-Protocol Translation statistics.
ZXR10(config)#show ipv6 nat statistics
Total active translations: 4 (2 static, 2 dynamic)
Hits: 1 Misses: 1
Expired translations: 0
show ipv6 nat translations
Use this command to display information about Network Address
Translation-Protocol Translation entry .
Privileged EXEC
show ipv6 nat translations
This command is supported after the platform version 4.6.02.
all information about the Network Address Translation-Protocol
Translation entry is displayed , such as address translation pairs;
creating time, and remaining ageing time.
show ipv6 route
Use this command to display information about IPv6 routing table.
All modes except user EXEC mode
show ipv6 route [{X:X::X:X / <0-128>| X:X::X:X | static | rip
| ospf | isis | connected | bgp | database}]
X:X::X:X / <0-128>
X:X::X:X
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 IPv6 Basic Protocols
Destination network ID and mask length of
the route
Destination network of the route
33