Metric-Style; Multi-Topology - Zte ZXR10 Command Manual

ZXR10 Command Manual (IPv6 Volume)
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
78 Confidential and Proprietary Information of ZTE CORPORATION
This example describes how to set the lifetime of router LSP pack-
ets to 1500 seconds.
ZXR10(config)#router isis
ZXR10(config-router)#max-lsp-lifetime 1500
lsp-refresh-interval

metric-style

Use this command to configure the metric type of the router. Re-
store default with the no form of this command.
Router configuration
metric-style {narrow | wide}[level-1 | level-2 | level-1-2]
no metric-style {narrow | wide}[level-1 | level-2 | level-1
-2]
narrow | wide
level-1 | level-2 |
level-1-2
It is narrow metric at level-1 and level-2 by default.
This command is supported after platform version 4.6.02.
This example describes how to make the router use the wide metric
at level-1 and level-2.
ZXR10(config)#router isis
ZXR10(config-router)# metric-style wide
ipv6 isis wide-metric
ipv6 isis metric

multi-topology

Use this command to configure IS-IS multi-topology.
IPv6 address family configuration

multi-topology

no multi-topology
If both IPv4 and IPv6 are configured at the same time, they will
have their own respective topologies.
The metric type of IS-IS must be wide before the configuration of
this command.
This example describes how to configure IS-IS multi-topology.
ZXR10(config)#router isis
Metric type, narrow or wide
Range of configured metric type, level-1,
level-2 or level-1-2