Zte ZXR10 Command Manual page 132

ZXR10 Command Manual (IPv6 Volume)
120 Confidential and Proprietary Information of ZTE CORPORATION
Field
Mertic
LocPref
Path
This example describes how to display detailed information about
routes.
ZXR10#show bgp ipv4 unicast detail
10:00:01 received from 100.1.1.1 (1.1.1.1)
origin i,nexthop 10.1.1.1,metric 100,localpref 200,atomic,
aggr 200 10.1.1.1,originator_id 123455,
community 1123464 2355 35665
cluster_id 10.1.1.1 100.1.1.1
unknown attribute type 11 flag ff len 20 type 12 flag fe
len 20
as path [100 200] <10> {65543} (65542 65544)
invalid due to import policy denied
Local
origin ?,nexthop 10.1.1.1,
10:04:00 advertised to 200.1.1.1 (2.2.2.2)
origin ?,nexthop 10.1.1.1,metric 100,localpref 200,atomic,
aggr 200 10.1.1.1,originator_id 123455,
community 1123464 2355 35665
cluster_id 10.1.1.1 100.1.1.1
unknown attribute type 11 flag ff len 20 type 12 flag fe
len 20
as path [100 200] <10> {65543} (65542 65544)
10:04:01 advertised to 201.1.1.1 (2.2.2.1)
origin ?,nexthop 10.1.1.1,metric 100,localpref 200,atomic,
aggr 200 10.1.1.1,originator_id 123455,
community 1123464 2355 35665
cluster_id 10.1.1.1 100.1.1.1
unknown attribute type 11 flag ff len 20 type 12 flag fe
len 20
as path [100 200] <10> {65543} (65542 65544)
It is displayed in segments that where the routes are learned and
which neighbors the routes imported from other routing protocol
are advertised to. For BGP routes, the displayed attribute is all the
attribute contents in Update messages. Only the origin and the
next hop attribute will be displayed for routes imported by other
routing protocol, and the content is the same as that displayed by
the previous ordinary BGP routes.
Most of the contents can be understood literally.
Tip:
(1.1.1.1), (2.2.2.2) and (2.2.2.3) are neighbor's route identifier.
as path [100 200] <10> {65543} 65542 65544 <> repre-
sents the AS-SET type of the AS-PATH attribute [] represents
the AS-SQUENCE type of the AS-PATH attribute represents the
AS_CONFED_SEQUENCE type of the AS-PATH attribute {} repre-
sents the AS_CONFED_SET type of the AS-PATH attribute.
Unknown attribute type 11 flag ff len 20: flag is displayed in hexa-
decimal format, usually others are displayed in dotted decimal for-
mat.
Description
Multi-exit discriminator
Local priority attribute designated
by the imported policy
Adds the leading As-path sequence
in Update messages to the Origin
attribute