Show Bgp All Protocol - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Example
1 notifications, 0 other errs
After last established received 0 messages
0 updates, 0 errs
0 opens, 0 errs
0 keepalives
0 vpnv4 refreshs, 0 ipv4 refreshs, 0 ipv4 multicast refreshs,
0 ipv6 refreshs,
0 errs
0 notifications, 0 other errs
All sent 3 messages
0 updates, 2 opens, 1 keepalives
0 vpnv4 refreshs, 0 ipv4 refreshs, 0 ipv4 multicast refreshs,
0 ipv6 refreshs,
0 notifications
After last established sent 1 messages
0 updates, 0 opens, 1 keepalives
0 vpnv4 refreshs, 0 ipv4 refreshs, 0 ipv4 multicast refreshs,
0 ipv6 refreshs,
0 notifications
For address family: IPv4 Unicast no activate
All received nlri 0, unnlri 0, 0 accepted prefixes
All sent nlri 0, unnlri 0, 0 advertised prefixes
Maximum limit 4294967295
Threshold for warning message 75%
Minimum time between advertisement runs is 30 seconds
Minimum time between origin runs is 15 seconds
For address family: IPv4 Multicast no activate
All received nlri 0, unnlri 0, 0 accepted prefixes
All sent nlri 0, unnlri 0, 0 advertised prefixes
Maximum limit 4294967295
Threshold for warning message 75%
For address family: VPNv4 Unicast no activate
All received nlri 0, unnlri 0, 0 accepted prefixes
All sent nlri 0, unnlri 0, 0 advertised prefixes
Maximum limit 4294967295
Threshold for warning message 75%
For address family: IPv6 Unicast
All received nlri 0, unnlri 0, 0 accepted prefixes
All sent nlri 0, unnlri 0, 0 advertised prefixes
Maximum limit 4294967295
Threshold for warning message 75%
Connections established 1
last error code is 2, last error subcode is 5
Local host: 2000::2, Local port: 179
Foreign host: 2000::1, Foreign port: 49161

show bgp all protocol

Use this command to display information about BGP configuration.
All modes
show bgp all protocol
This example describes how to display information aboout BGP
configuration.
ZXR10#show bgp all protocol
BGP router ID is 172.168.1.2, Local as is 200
Hold time is 90 seconds, KeepAlive time is 30 seconds
Default local preference is 100
Default export metric is 0
IGP synchronization is enabled
Default information advertise is disabled
Always compare med is disabled
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 BGP4+ Protocol
117