Show Bgp Ipv6 Unicast Labels; Show Bgp Ipv6 Unicast Neighbor(Bgp4+) - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Example
Purpose
Command Modes
Syntax
Syntax
Description
Example

show bgp ipv6 unicast labels

Use this command to display information about labels of the IPv6
routing table which learns from 6PE.
All modes
show bgp ipv6 unicast labels
This example describes how to display information about labels of
the IPv6 routing table which learns from 6PE
ZXR10#show bgp ipv6 unicast labels
Network Next Hop
100:1::1 3ffe:1::1
200:1::2 3ffe:1::1
show bgp ipv6 unicast
neighbor(BGP4+)
Use this command to display information about BGP IPv6 unicast
address family neighbors.
All modes
show bgp ipv6 unicast neighbor [<ip-address>]
show bgp ipv6 unicast neighbor [in | out]<ip-address>|<ipv
6-address>
<ip-address>
in
out
This example describes how to display neighbor information.
Zxr10#show bgp ipv6 unicast neighbor 3ffe:1::1
BGP neighbor is 3ffe:1::1, remote AS 100, internal link
BGP version 4, remote router ID 0.0.0.0
BGP state = Connect
hold time is 0 seconds, keepalive interval is 0 seconds
All received 0 messages
0 updates, 0 errs
0 opens, 0 errs
0 keepalives
0 vpnv4 refreshs, 0 ipv4 refreshs, 0 ipv4 multicast refreshs,
0 ipv6 refreshs,
Confidential and Proprietary Information of ZTE CORPORATION
In Label Out Label
17 20
18 21
Neighbor IP address, in the dotted decimal
format
Displays all the routes received from the
specific ordinary neighbor
Displays all the routes advertised to the
specific ordinary neighbor
Chapter 6 BGP4+ Protocol
121