Debug Ipv6 Pimsm Neighbor; Ipv6 Mld Last-Member-Query-Interval; Ipv6 Mld Query-Interval - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Purpose
Command Modes
Syntax
Syntax
Description
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description

debug ipv6 pimsm neighbor

Use this command to enable the debug information function of
some neighbor, such as the receiving and sending of hello packets.
Disable this function with the no form of this command.
Privileged EXEC

debug ipv6 pimsm neighbor

no debug ipv6 pimsm neighbor
ipv6 mld last-member-query
-interval
Use this command to configure the last member query interval for
Multicast Listener Discovery (MLD). Disable this function with the
no form of this command.
Interface configuration
ipv6 mld last-member-query-interval <seconds>
no ipv6 mld last-member-query-interval
<seconds>
show ipv6 mld interface

ipv6 mld query-interval

Use this command to configure the query interval for Multicast
Listener Discovery (MLD). Restore the default with the no form of
this command.
Interface configuration
ipv6 mld query-interval <seconds>
no ipv6 mld query-interval
<seconds>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 IPv6 Multicast Protocol
Query interval in seconds, range: 1~3600,
default: 1
MLD query interval in seconds, range:
1~3600, default: 125 seconds
133