Ipv6 Pim; Ipv6 Pim Bsr-Border; Ipv6 Pim Dr-Priority - Zte ZXR10 Command Manual

ZXR10 Command Manual (IPv6 Volume)
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Instructions
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Instructions
Purpose
Command Modes
Syntax
138 Confidential and Proprietary Information of ZTE CORPORATION
ipv6 router pimsm

ipv6 pim

Use this command to enable IPv6 multicast routing protocol
PIM-SM on an interface. Disable PIM-SM protocol on an interface
with the no form of this command.
Interface configuration

ipv6 pim

no ipv6 pim
PIM-SM is disabled on the interface by default.
If PIM-SM protocol is enabled on the interface, then Multicast Lis-
tener Discovery protocol will be enabled automatically on the in-
terface.
show ipv6 pim interface

ipv6 pim bsr-border

Use this command to configure a border for all bootstrap message
(BSMs) of any scope on a specified interface. Cancel this configu-
ration with the no form of this command.
Interface configuration

ipv6 pim bsr-border

no ipv6 pim bsr-border
This command is disabled by default.
Bootstrap messages (BSMs) of any scope are prevented from being
forwarded or accepted on the interface on which this command is
configured. This command effectively distributes the network into
multiple areas with different bootstrap messages.

ipv6 pim dr-priority

Use this command to configure the designated router (DR) prior-
ity on a Protocol Independent Multicast (PIM) router. Restore the
default value with the no form of this command.
Interface configuration
ipv6 pim dr-priority <priority>
no ip pim dr-priority