Show Ipv6 Ospf Interaface - Zte ZXR10 Command Manual

ZXR10 Command Manual (IPv6 Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
64 Confidential and Proprietary Information of ZTE CORPORATION
Link State ID ADV Router
0.0.0.4 15.15.15.15
0.0.0.9 156.1.1.1
Router-LSA (Area 0.0.0.3)
Link State ID ADV Router
0.0.0.0 15.15.15.15
0.0.0.0 156.1.1.1
Network-LSA (Area 0.0.0.3)
Link State ID ADV Router
0.0.0.4 15.15.15.15
Intra-Area-Prefix-LSA (Area 0.0.0.3)
Link State ID ADV Router
0.0.0.0 15.15.15.15
0.0.3.236 15.15.15.15
0.0.0.1 156.1.1.1
AS-external-LSA
Link State ID ADV Router
0.0.0.1 156.1.1.1

show ipv6 ospf interaface

Use this command to display information about the interface of an
OSPFv3 instance.
All modes
show ipv6 ospf interface <interface-name>
<interface-name>
Use the show ipv6 ospf interface command to show information
about all interfaces.
This example describes how to show information about all ospfv3
interfaces.
ZXR10#show ipv6 ospf interface
fei_3/1 is up, line protocol is up
Interface ID 9
IPv6 Prefixes
fe80::2d0:d0ff:fec0:180/64 (Link-Local Address)
6001::1/64
3001::1/64
OSPFv3 Process (1), Area 0.0.0.3, Instance ID 0
Router ID 156.1.1.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 15.15.15.15
Interface Address fe80:9::212:daff:fe88:7540
Backup Designated Router (ID) 156.1.1.1
Interface Address fe80::2d0:d0ff:fec0:180
Timer interval configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
Age Seq#
1116 0x8000000c 0x9fad
301 0x80000034 0xa820
Age Seq#
292 0x80000013 0xf56a
301 0x80000047 0x3da7
Age Seq#
308 0x80000001 0xe606
Age Seq# CkSum Prefix Reference
307 0x8000000f 0x737d 1
308 0x80000001 0x2bfe 3
301 0x80000043 0xefa7 1
Age Seq#
301 0x80000037 0x7e15 E2
Interface name shown independently
CkSum Prefix
2
2
CkSum Link
1
1
CkSum
Router-LSA
Network-LSA
Router-LSA
CkSum