Alarm; Alarm Cpuload-Interval - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume I)
Function
Command Mode
Syntax
Syntax
Description
Instruction
Example
Function
Command Mode
Syntax
Syntax
Description
Default
Instructions
Example
60 Confidential and Proprietary Information of ZTE CORPORATION

alarm

Use this command to open environment alarm. Close this alarm
with no command.
Global configuration
alarm <type> on
<type>
For ZXR10 T128, ZXR10 T1200 only CPU load alarm is enabled.
Temperature alarm and memory alarm take effect.
This example describes how to enable CPU load alarm.
ZXR10(config)#environ
ZXR10(config-environ)#alarm cpuload on

alarm cpuload-interval

Use this command to set CPU load alarm test time interval. Re-
cover default value with no command.
Global configuration
alarm cpuload-interval <30~120>
no alarm cpuload-interval
<30~120>
CPU load alarm test time interval is 30s by default.
� Make sure that alarm cpuload-on is used before using this com-
mand.
� In ZXR10 T128, ZXR10 T1200, this command is included in
check command in environment configuration mode.
check command in environment configuration mode for more
information.
This example describes how to set CPU load alarm test time inter-
val to 60s.
ZXR10(config)#alarm cpuload-interval 60
Environment alarm types
all all kinds of environment alarm types
cpuload CPU load alarm
fan fan alarm
power power alarm
temperature temperature alarm
memory memory alarm
CPU load alarm test time interval, the range
is from 30 to 120 (unit: second).
See