Removing The Exit Rollers; Figure 8-13 Removing The Exit Rollers - Tektronix Phaser 440 Service Manual

8
FRU Disassembly/Assembly

Removing the exit rollers

8-16 Phaser 440 Color Printer
1.
Power down the printer and remove the power cord.
2. Open the top cover and remove the front access cover. Also, remove
the top front, left and right side cabinet panels as described in "Printer
cabinet panels" on page 8-4.
3. Lower exit roller: Remove the E-rings securing the lower exit roller
pulley.
4. Remove the lower exit roller pulley, roller, bushings and the
paper-eject belt.
5. Upper exit roller: Remove the E-rings securing the upper exit roller
pulley. Also remove the E-ring securing the other end of the roller.
6.
Remove the upper exit roller pulley, roller and bushings.
Reverse these steps to reinstall the exit rollers.
5
3

Figure 8-13 Removing the exit rollers

6
Upper exit roller
5
3
Lower exit
roller
4
8345-31