Rep 4.3 Fuser Motor; Rep 4.4 Paper Handling Motor - Xerox Phaser 790 Service Manual

REP 4.3 Fuser Motor

Parts List on PL 10.1
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Rear Cover (REP 14.6).
3. Remove the Fuser Motor (Figure 1).
Replacement
1. Reinstall the Fuser Motor in the reverse order of removal.
3
Remove the
Fuser Motor
2
Remove the
screws
1
Disconnect the con-
nector
Figure 1 Removing the Fuser Motor
Initial Issue
Phaser 790/DocuColor 2006
WARNING

REP 4.4 Paper Handling Motor

Parts List on PL 10.1
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Rear Cover (REP 14.6).
3. Remove the Drive Motor PWB (REP 4.5).
4. Remove the Paper Handling Motor (Figure 1).
Replacement
1. Reinstall the Paper Handling Motor in the reverse order of removal.
2
Remove the
Paper Handling
Motor
1
Remove the
screws
Figure 1 Removing the Paper Handling Motor
10/00
4-17
WARNING
Repairs and Adjustments
REP 4.3, REP 4.4