Gp 17 Foreign Interface; Gp 18 Identifying Pin 1 On A Double Plug - Xerox Phaser 790 Service Manual

GP 17 Foreign Interface

Refer to the 003-333 Foreign Interface RAP in Section 2.
Phaser 790/DocuColor 2006

GP 18 Identifying Pin 1 on a Double Plug

The purpose is to locate pin #1 on a double plug configuration.
Procedure
1. Hold the plug as shown in Figure
With the plug held as shown, Pin 1 is
located here
Figure 1 Identifying Pin 1 on a Double Plug
03/01
6-19
1.
General Procedures and Information
GP 17, GP 18