Sorter Communications Failure Rap - Xerox Phaser 790 Service Manual

003-312 Sorter Communications Failure RAP

The Sorter Control Logic did not successfully receive the Start signal from the MCU PWB.
Procedure
Go to Flag 1 and check the wires for an open or short circuit. The wires are good.
Y N
Repair the wires.
Replace the Sorter Control PWB (PL 19.1). If the problem continues, replace the MCU PWB
(PL 11.2)
Initial Issue
Phaser 790/DocuColor 2006
10/00
2-37
Status Indicator RAPs
003-312