Clearing Area 5 Jams; Clearing The Fuser Area - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Clearing Area 5 jams
Clearing Area 5 jams
Perform one of the following procedures when the message Clear Jam in
Area 5 is displayed on the Control Panel.
•
If you do not have the Duplex Tray option installed perform the
the Fuser Area
•
If you have the Duplex Tray option installed, go to the
Upper Inverter
Clearing the Fuser Area
1.
In order to access Area 5, pull open the Fuser Area access cover.
WARNING
The Fuser may be hot. Use care when reaching into the Fuser area.
2.
To release any paper, lift the green lever as shown, and gently pull the
paper in the direction of the arrow.
Xerox DocuColor 2006
procedure below.
procedure.
24. Problem Solving
Clearing
Clearing the
301105a
301106a
24-19
Advertisement
Table of Contents
