Rep 6.10 Aps Sensor - Xerox Phaser 790 Service Manual

REP 6.10 APS Sensor

Parts List on PL 16.1
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power
switch on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Platen Glass (REP 6.1).
3. Remove the Cover (Figure 1).
1
Remove the screws (8)
and the cover
Figure 1 Removing the Cover
Repairs and Adjustments
REP 6.10
4. Remove the APS Sensor (Figure 2).
2
Disconnect the connector
Figure 2 Removing the APS Sensor
Replacement
1. Perform the procedure for removal in reverse.
10/00
4-42
1
Release the locking
tabs and remove the
APS Sensor
Initial Issue
Phaser 790/DocuColor 2006