Rep 14.1 Front Cover Assembly; Rep 14.2 Front Mid Cover - Xerox Phaser 790 Service Manual

REP 14.1 Front Cover Assembly

Parts List on PL 1.1
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Open the Tray 1 Assembly.
3. Remove the Front Cover Assembly (Figure 1).
Replacement
1. Reinstall the Front Cover Assembly in the reverse order of removal.
3
Remove the
two screws
4
Remove the
Front Cover
Assembly and
Hinge Plates
Figure 1 Removing the Front Cover Assembly
Initial Issue
Phaser 790/DocuColor 2006
WARNING
2
Remove the
two screws
1
Open the Front
Cover Assembly

REP 14.2 Front Mid Cover

Parts List on PL 1.1
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Front Mid Cover (Figure 1).
3
Slide the cover
toward the right, and
then remove the Front
Mid Cover
1
Open the
Tray 1
Assembly
Figure 1 Removing the Front Mid Cover
10/00
4-139
WARNING
2
Remove the
knurled screw
Repairs and Adjustments
REP 14.1, REP 14.2