Xerox Phaser 790 Service Manual page 19

Hide thumbs Also See for Phaser 790:

Table of Contents

001-701 AC Power RAP

Initial Actions

Ensure AC Power is available at the wall receptacle.

Ensure the Power Cord is good. Replace the Power Cord if it is defective (PL 11.1).

Switch off the power. Remove the Rear Cover. Switch on the power. If AC Power is not mea-

sured at J34-2 to terminal N on the Low Voltage Power Supply, replace the Low Voltage Power

Supply (PL 11.1).

Initial Issue

Phaser 790/DocuColor 2006

Status Indicator RAPs

Chapters

Table of Contents

Docucolor 2006