Hole Punch Option Kit; Auxiliary Interface Device; Consumables; Drum Cartridges - Xerox DocuColor 240 Supplementary Manual

DocuColor 240/250

Hole Punch Option Kit

This kit enables the additional finishing capability of hole punching to the
Advanced Office Finisher or Professional Finisher (with Booklet Maker).

Auxiliary Interface Device

This kit enables the use of a third party accounting device such as a card swipe
or coin operated unit to control the use of print, copy and scan functions.

Consumables

There are several Consumables included in your machine. The machine will
inform you when you need to order a new module and when to install it.

Drum Cartridges

The Drum Cartridges will provide approximately 30,000 images. The machine
display and this documentation will enable you to successfully install the new
cartridges so you do not have to wait for a service call.

Toner Cartridges

The toner cartridges will provide approximately 15,000 prints at 6% area
coverage. Supplied with the toner cartridge is the waste toner container.

Fuser

The fuser will provide approximately 100,000 prints or copies.
Waste Toner Container
The waste toner container will need changing after approximately 30,000 prints
or copies at 6% area coverage.

Charge Corotron

The machine display and this documentation will enable you to successfully
install the new Charge Corotron so you do not have to wait for a service call.

Control Panel

The Control Panel is divided into four areas: Touch Screen, Pathway buttons,
Keypad and Feature buttons.
The touch screen allows you to select all the available programming features. It
also displays fault clearance procedures and general machine information.
The actual touch screen will vary depending on the pathway buttons selected
and the options available on your machine. The touch screen also displays
important messages about the current condition of the machine, no matter what
pathway has been selected.
DocuColor 240/250 Training and Information Guide 10