Clearing A Jam In The Fuser - Xerox DocuColor DocuColor 4 Quick Start Manual

Clearing a jam in the fuser

WARNING: The fuser surface is very hot.
!
Do not touch the fuser or you may be
burned.
Show how to clear a paper jam in the fuser.
1. See Figure 15. Pull out the lower left side unit as
far as it will go.
2. Remove the jammed paper. Be sure no torn
pieces of paper are left inside.
Do not touch the white roller on the oil
!
roll cartridge. The oil will stick to your
skin.
3. Place two pieces of paper on a flat surface to set the
oil roll cartridge on when you remove it.
4. See Figure 16. Remove the oil roll cartridge and
set it aside.
5. Removed the jammed paper in the direction of
the arrow. Be sure no torn pieces of paper are
left inside the fuser area.
6. See Figure 17. Reinsert the oil roll cartridge.
7. Push the lower left unit firmly back into the copier/
printer.
Getting to Know Your Product
QuickStart Practice Guide
1
Figure 15
4
Figure 16
6
Figure 17
2
5
7
7