Xerox Phaser 790 Service Manual page 148

Hide thumbs Also See for Phaser 790:

Table of Contents

008-707 Duplex Tray Open RAP

The Control Logic did not detect a Duplex Tray Set (L) +5 VDC signal.

Initial Actions

Push in the Duplex Tray Assembly.

Go to Flag 1. Check the wires for an open. Check the pins in the connectors for proper connec-

tion. The connector J 154 has a wire loop from J 154 pin 1 to pin 2. The connector J 154 is

located in the Duplex Tray. If the wires and the connectors are good, replace the Duplex Con-

trol PWB (PL 15.6).

Status Indicator RAPs

Initial Issue

Phaser 790/DocuColor 2006

Chapters

Table of Contents

Docucolor 2006