REP 1.12 Communication PWB
Parts List on PL 11.2
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1.
Switch off the machine power and disconnect the machine Power Cord.
2.
Remove the Bypass Tray / Registration Assembly (REP 8.10).
3.
Remove the Communication PWB (Figure 1).
Replacement
1.
Reinstall the Communication PWB in the reverse order of removal.
Repairs and Adjustments
REP 1.12
WARNING
3
Remove the
Communication
PWB
Figure 1 Removing the Communication PWB
10/00
4-12
1
2
Disconnect the
Compress the
connector
two standoffs
Phaser 790/DocuColor 2006
Initial Issue