Xerox Phaser 790 Service Manual page 364

9. Stand the IBT Assembly with its rear side at the bottom.
Figure 3 Removing the IBT Belt
10. Remove the IBT Belt from the Assembly.
Repairs and Adjustments
REP 9.21
Figure 4 Removing the IBT Belt
Replacement
Be careful not to damage or dirty the IBT Belt during the reinstallation.
1. Clean the Push In Shaft of all foreign matter or lubrication prior to reinstalling the IBT Belt.
2. Reinstall the IBT Belt in the reverse order of removal.
10/00
4-110
CAUTION
Phaser 790/DocuColor 2006
Initial Issue