Rep 6.23 Control Panel Assembly - Xerox Phaser 790 Service Manual

REP 6.23 Control Panel Assembly

Parts List on PL 16.6
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Right Cover (REP 6.2).
3. Remove the Left Cover (REP 6.3).
4. Remove the Control Panel Assembly (Figure 1).
2
Remove the four screws and
the Control Panel Assembly
by moving it in the direction
indicated
1
Disconnect the
connector
Figure 1 Removing the Control Panel Assembly
Replacement
1. Perform the procedure for removal in reverse.
Repairs and Adjustments
REP 6.23
WARNING
10/00
4-52
Initial Issue
Phaser 790/DocuColor 2006