REP 4.5 Drive Motor PWB
Parts List on PL 10.1
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1.
Switch off the machine power and disconnect the machine Power Cord.
2.
Remove the Rear Cover (REP 14.6).
3.
Remove the Drive Motor PWB (Figure 1).
Replacement
1.
Reinstall the Drive Motor PWB in the reverse order of removal.
2
Remove the
screws
1
Disconnect the
four connec-
tors
Figure 1 Removing the Drive Motor PWB
Repairs and Adjustments
REP 4.5
WARNING
3
Remove the Drive
Motor PWB
10/00
4-18
Initial Issue
Phaser 790/DocuColor 2006