Rep 8.43 Top Exit Sensor - Xerox Phaser 790 Service Manual

REP 8.43 Top Exit Sensor

Parts List on PL 9.2
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Exit Transport Assembly. (REP 8.40)
3. Remove the Top Exit Sensor (Figure 1).
1
Disconnect the
connector
Figure 1 Removing the Top Exit Sensor
Replacement
1. Perform the removal procedure in reverse.
Repairs and Adjustments
REP 8.43
WARNING
2
Release the locking tabs
and remove the Top Exit
Sensor
10/00
4-90
Initial Issue
Phaser 790/DocuColor 2006