Rep 8.37 Inverter Sensor - Xerox Phaser 790 Service Manual

REP 8.37 Inverter Sensor

Parts List on PL 15.5
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Feeder Left Cover.
3. Remove the Inverter/Lower Assembly. (REP 8.35)
4. Remove the Inverter Roll (Figure 1)
3
Remove the
Inverter Roll
2
Remove the E-ring and bearing
Figure 1 Removing the Inverter Roll
Initial Issue
Phaser 790/DocuColor 2006
WARNING
5. Remove the Inverter Sensor. (Figure 2)
1
Remove the
E-ring, gear,
E-ring, and
bearing
Replacement
1. Perform the removal procedure in reverse.
10/00
4-85
2
Disconnect the
connector
Chute
Figure 2 Removing the Inverter Sensor
3
Release the
locking tabs and
remove the
Inverter Sensor
1
Remove the two screws
and the Chute
Repairs and Adjustments
REP 8.37