Rep 4.2 Fuser Drive Unit - Xerox Phaser 790 Service Manual

REP 4.2 Fuser Drive Unit

Parts List on PL 10.1
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Rear Cover (REP 14.6).
3. Remove the Fuser Assembly (REP 10.1).
4. Remove the Fuser Motor (REP 4.3).
5. Remove the LVPS (REP 1.1).
6. Remove the Fuser Drive Unit (Figure 1).
Replacement
Be careful not to pinch the harness when reinstalling the Fuser Drive Unit.
1. Reinstall the Fuser Drive Unit in the reverse order of removal.
Repairs and Adjustments
REP 4.2
WARNING
CAUTION
4
Remove the
Fuser Drive
Unit
3
Remove the five
screws
1
Remove the screw
securing the Drive
Clamp-N
Figure 1 Removing the Fuser Drive Unit
10/00
4-16
2
Remove the K-
clip
Initial Issue
Phaser 790/DocuColor 2006