Figure 54 Tray 1 No Paper Sensor Assembly; Rrp 2.6 Tray 1 No Paper Sensor Assembly - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

RRP 2.6 Tray 1 No Paper Sensor Assembly

(See PL 4.2 Paper

Figure 54 Tray 1 No Paper Sensor Assembly

Removal
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
2. Remove the MBF Gear Cover (RRP 1.8 MBF Gear Cover).
3. Disconnect P/J126 from the sensor assembly.
4. Remove the screw that secures the Tray 1 No Paper Sensor Assembly Bracket to
the MBF.
5. Use a small screwdriver to carefully release the two locking tabs that secure the
sensor to the sensor assembly bracket.
6. Release the sensor harness from the harness clamps and remove the sensor.
Replacement
Reinstall the components in the reverse order.
266
Handler)
Phaser 5400 Laser Printer Service Guide