Calibrate the scanner
Maintain the Océ TCS500 scanner
Calibrate the scanner
Introduction
You can calibrate the scanner when you are not satisfied with the scan quality. Use
the calibration wizard to calibrate the scanner.
How to calibrate the scanner
Select 'System' with the lower-right softkey.
1.
The 'System settings' screen opens.
Select 'Scanner calibration' with a left softkey to start the calibration wizard.
2.
The message 'Insert calibration sheet' and the following icon appears.
[177]
[177] The 'Insert calibration sheet' icon
Insert the calibration sheet and press the green start key to start the calibration
3.
process.
The message 'Scanner is calibrating...' and the following icon appears.
[178]
[178] The 'Scanner is calibrating...' icon
When the calibration process is ready, the message 'Press OK to continue' and the
following icon appears.
[179]
[179] The remove the calibration sheet icon
Select 'OK' with the lower-right softkey.
4.
238
Chapter 11 Maintain the Océ TCS500