Define The Media Sizes - Oce TCS500 User Manual

Define the media sizes

Introduction
Use this setting to define the default media range.
If you want to select a new media size on the operator panel of the printer, only the
sizes in the defined media series are available.
When 'Auto format' is enabled, the 'Media sizes' setting selects which sizes are used
(only those available in the 'Media sizes').
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following steps
to log on.
Click 'File' and select 'Log on'.
1.
Select 'Key Operator' and enter the password.
2.
How to define the media series
Click 'View' and select 'Key Operator settings'.
1.
Navigate to Key Operator - System - Media - Media sizes.
2.
Define the required value.
3.
[31]
Setting
'Media sizes'
Click 'Apply' to confirm the settings.
4.
Click 'File' and select 'Log off' to prevent unauthorised use.
5.
Group
'DIN'
'DIN carto'
'ANSI small'
'ANSI mixed'
Define the media sizes
Values
A4, A3, A2, A1, A0, E+, B1_707,
B2_707
A4, A3, A2, A1, A0, E+, B1_700,
B2_700
A, B, C, D, E, E+, 30 inch
A, A+, B, B+, C, C+, D, D+, E,
E+, 30 inch
85