Define The Display Language Of The Océ Tcs500 - Oce TCS500 User Manual

Define the display language of the Océ TCS500
Define the display language of the Océ TCS500
Introduction
The Océ Settings Editor allows you to define the 'First language' (the default display
language) and the 'Second language' (the alternative display language) for the
following components.
The controller applications (Océ Settings Editor, Océ System Control Panel, Océ
Queue Manager)
The printer operator panel
The scanner operator panel
If you have a keyboard, mouse and monitor with your Océ Power Logic
you can access the controller applications locally on the controller. If you do not have
a keyboard, mouse and monitor with your Océ Power Logic
use Océ Remote Logic
The 'First language' and the 'Second language' you defined in the Océ Setting Editor
are also the display languages that are available on the printer operator panel and the
scanner operator panel. You can toggle between these two languages using the
operator panel.
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following steps
to log on.
Click 'File' and select 'Log on'.
1.
Select 'Key Operator' and enter the password.
2.
How to define the default and the alternative display languages
Click 'View' and select 'Key Operator settings'.
1.
Navigate to Key Operator - System - Regional settings - Display languages -
2.
First language.
Define one of the available languages as the default language.
3.
Navigate to Key Operator - System - Regional settings - Display languages -
4.
Second language
Define one of the available languages as the alternative language.
5.
Click 'Apply' to confirm the settings.
6.
Click 'File' and select 'Log off' to prevent unauthorised use.
7.
62 Chapter 3 Prepare the Océ TCS500 for use
®
to connect to the controller applications.
®
controller,
®
controller, you must