Chapter 2 Cisco Ios Commands; Aaa Authentication Dot1X - Cisco Catalyst 2950 Command Reference Manual

Cisco IOS Commands

aaa authentication dot1x

Use the aaa authentication dot1x global configuration command to specify one or more authentication,
authorization, and accounting (AAA) methods for use on interfaces running IEEE 802.1X. Use the no
form of this command to disable authentication.
Syntax Description default
method1
[method2...]
Defaults No authentication is performed.
Command Modes
Global configuration
Command History Release
12.1(6)EA2
78-11381-05
aaa authentication dot1x {default} method1 [method2...]
no aaa authentication dot1x {default} method1 [method2...]
Use the listed authentication methods that follow this argument as the default
list of methods when a user logs in.
At least one of these keywords:
enable—Use the enable password for authentication.
•
• group radius—Use the list of all Remote Authentication Dial-In User
Service (RADIUS) servers for authentication.
• line—Use the line password for authentication.
local—Use the local username database for authentication.
•
• local-case—Use the case-sensitive local username database for
authentication.
• none—Use no authentication. The client is automatically authenticated by
the switch without using the information supplied by the client.
Modification
This command was first introduced.
C H A P T E R
Catalyst 2950 Desktop Switch Command Reference
2
2-1