lacp actor port priority
Use this command to configure the priority value assigned to the Aggregation Port. The valid
range for <priority> is 0 to 255.
Default
0x80
Format
lacp actor port priority <priority>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor port priority
Use this command to configure the default priority value assigned to the Aggregation Port.
Format
no lacp actor port priority
Mode
Interface Config
lacp actor system priority
Use this command to configure the priority value associated with the LACP Actor's SystemID.
The range for <priority> is 0 to 65535.
Default
32768
Format
lacp actor system priority <priority>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-97