Concluding Steps - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Accessible drives
Figure 172: Installing the LSD module
Ê Connect the LSD cable to the LSD module (1).
Ê Connect the LSD cable to the connector SMB1 of the system board (2).
Ê Route the LSD cable through the upper cable guide (3).

12.2.4 Concluding steps

"Installing the fan box" on page 164
Ê
"Reassembling" on page 63
Ê
"Connecting the server to the power source" on page 69
Ê
"Enabling BitLocker functionality" on page 95
Ê
302 Upgrade and Maintenance Manual
RX300 S8