Preparing The Front Panel Module; Installing The Front Vga Connector - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Front panel and external connectors

13.2.1.3 Preparing the front panel module

Figure 235: Breaking out the front VGA cover plate
Ê Break out the VGA cover plate on the front panel cover.
I
Please note that once removed, the VGA cover plate cannot be
refitted.

13.2.1.4 Installing the front VGA connector

Figure 236: Front VAG cable
Ê Remove the two hexagon bolts from the connector.
370 Upgrade and Maintenance Manual
RX300 S8