Table of Contents
Advertisement
Conversion configurations
15.3.7 Configuration 7 to configuration 8
Ê Replace multicage with the panelhousing and a HDD cage as described in
section
"Replacing the front cages" on page
Ê Connect cable C7 from connector X1 of the 4x 2.5-inch SAS backplane to
connector X3 of the 12x 2.5-inch SAS backplane
15.4
Concluding steps
"Installing the fan box" on page 164
Ê
"Reassembling" on page 63
Ê
Ê Reconnect all external cables.
"Connecting the server to the power source" on page 69
Ê
"Switching on the server" on page 71
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
"Enabling BitLocker functionality" on page 95
Ê
464
98.
Upgrade and Maintenance Manual
458.
"Using the Chassis ID
RX300 S8
Advertisement
Table of Contents
