Connecting The Bbu Cable To The Bbu - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
9.6.2.2

Connecting the BBU cable to the BBU

Figure 101: Connecting the BBU cable
Ê Connect the BBU cable to the BBU.
V
CAUTION!
Make sure that the connector side with the three dots points towards you
(see close-up). Otherwise, short-circuits may result!
I
There are different BBUs available. Please notice the position of the
three bolts (see circles
installing the BBU in the BBU holder.
210
figure 102) to recognise the right position for
Upgrade and Maintenance Manual
RX300 S8