Installing The Bbu In The Holder; Installing The Bbu Holder Onto The Air Duct - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

9.6.2.3

Installing the BBU in the holder

Figure 102: Installing the BBU in the BBU holder (example B)
Ê At a slight angle, fit the BBU under the right retaining bracket on the BBU
holder (1).
Ê Fold down the BBU until it locks in place (2).
9.6.2.4

Installing the BBU holder onto the air duct

I
There are different BBUs available. The position of the BBU cable on the
BBU can differ from the following example.
RX300 S8
Upgrade and Maintenance Manual
Expansion cards and backup units
211