Replacing The Tape/Rdx Drive In 3.5-Inch Version; Preliminary Steps; Removing The Defective Tape/Rdx Drive; Installing The New Tape/Rdx Drive - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

12.10 Replacing the tape/RDX drive in 3.5-inch
version
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver

12.10.1 Preliminary steps

Perform the following procedures:
"Disabling BitLocker functionality" on page 73
Ê
"Locating the defective server" on page 51
Ê
"Removing backup and optical disk media" on page 76
Ê
"Verifying and configuring the backup software solution" on page 77
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 57
Ê
"Removing the fan box" on page 162
Ê

12.10.2 Removing the defective tape/RDX drive

"Removing the drive cage" on page 324
Ê
"Removing a tape/RDX drive out of the cage" on page 325
Ê

12.10.3 Installing the new tape/RDX drive

"Installing a tape/RDX drive in the cage" on page 317
Ê
"Installing the tape/RDX drive" on page 319
Ê
RX300 S8
Upgrade and Maintenance Manual
Accessible drives
Hardware: 10 minutes
327