Installing Hot-Plug Power Supply Units; Preliminary Steps; Removing The Dummy Cover - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

6.2

Installing hot-plug power supply units

Customer Replaceable Unit
(CRU)
Tools: tool-less
6.2.1

Preliminary steps

No steps needed.
6.2.2

Removing the dummy cover

Figure 17: Removing the dummy cover
Ê Press in on both release latches (1) and remove the dummy cover (2).
RX300 S8
Upgrade and Maintenance Manual
Power supply units
Hardware: 5 minutes
105