Swapping Processors - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

System board and components

14.6.3.2 Swapping processors

Preparing the processor socket load plates on the new system board
"Removing the protective socket cover" on page 269
Ê
Removing processors from the defective system board
Ê Carefully remove the processors from their sockets on the defective system
board as described in
V
Remove and reinstall one processor at a time. Do not remove the
second processor from the defective system board until the first
processor has been installed on the new system board.
Installing processors on the new system board
"Installing the new processor" on page
Ê
Installing protective socket covers on the defective system board
I
Since the defective system board is sent back for repair, protect the
delicate processor socket springs with a socket cover.
"Installing the protective cover" on page 280
Ê
438
"Removing the processor" on page
Upgrade and Maintenance Manual
268.
278.
RX300 S8