Concluding Steps - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 87: Installing the expansion card (B)
Ê Fasten the expansion card with the screw.
Ê If applicable, install SFP+ transceiver modules into the new expansion card,
as described in section
Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
cables" on page
Ê If applicable, connect a BBU to the expansion card as described in section
"Installing a BBU" on page
9.3.1.4

Concluding steps

"Reassembling" on page 63
Ê
Ê Reconnect all external cables to the expansion card.
"Connecting the server to the power source" on page 69
Ê
"Switching on the server" on page 71
Ê
"Updating RAID controller firmware" on page 84
Ê
Ê If applicable, "Enabling Option ROM scan" on page
184
"Installing SFP+ transceiver modules" on page
465.
209.
Upgrade and Maintenance Manual
"List of used
85.
RX300 S8
234.