Removing The Tpm - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX300 S8:
Table of Contents

Advertisement

14.4.2.2 Removing the TPM

"Removing the defective system board" on page
Ê
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 279: Removing the TPM screw
Ê Locate the slotted lower end of the TPM screw (1).
Ê Carefully loosen the TPM screw using a thin slotted screw driver (e.g.
watchmaker's screw driver) or the dedicated TPM screw driver (Japanese
market) (2).
V
CAUTION!
Ensure to turn the screw clockwise in order to remove it!
Slowly and carefully increase the pressure on the screw until it begins
to turn. The effort when loosing the screw should be as low as
possible.
RX300 S8
Upgrade and Maintenance Manual
System board and components
434.
421

Advertisement

Table of Contents
loading

Table of Contents