Installing A Fbu; Preliminary Steps; Installing Tfm To The Raid Controller (If Applicable) - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

9.6.5

Installing a FBU

Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver
V
CAUTION!
For further safety information, please refer to chapter
information" on page
9.6.5.1

Preliminary steps

"Disabling SVOM boot watchdog functionality" on page 74
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 57
Ê
9.6.5.2

Installing TFM to the RAID controller (if applicable)

I
To connect an FBU to the controller D3116 you need a TFM. Other
controllers so as D9285 can be connected directly.
RX300 S8
39.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
"Important
221