9.6.7.4
Removing the FBU from the holder
Figure 121: Removing the FBU from the holder
Ê Pull the FBU at a slight angle out of the holder.
9.6.7.5
Installing a new FBU
"Connecting the FBU cable to the FBU" on page 225
Ê
"Preparing the FBU" on page 223
Ê
"Installing the FBU holder onto the air duct" on page 225
Ê
9.6.7.6
Concluding steps
"Reassembling" on page 63
Ê
"Connecting the server to the power source" on page 69
Ê
RX300 S8
Upgrade and Maintenance Manual
Expansion cards and backup units
233