Re-Installing The Front Panel Cage - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Panelhousing
Figure 260: Removing the front panel cage
Ê Remove the screw.
Ê Push the front panel cage out of the chassis frontward.
"Removing the front panel module" on page 363
Ê

13.4.1.3 Re-installing the front panel cage

Multicage
Ê Install the removed modules.
– "Installing the front panel module" on page 365
– "Installing an ODD" on page 310
– "Installing a LSD module" on page 301
RX300 S8
Upgrade and Maintenance Manual
Front panel and external connectors
395